FOR THE APIARY

Ένας άλλος τρόπος για να αποσπάσετε τη βασίλισσα πάνω από τα πλαίσια και να τη μαρκάρετε με μεγάλη ευκολία. Ακουμπάτε το μεγάλο άνοιγμα του σωλήνα γύρω από τη βασίλισσα και αυτή θα αρχίσει να περπατάει μέσα σε αυτόν. Κλείστε με το χέρι σας το σωλήνα για να σκοτεινιάσει. Η βασίλισσα θα περπατήσει προς το φως και το επάνω μέρος όπου βρίσκεται η πλαστική σίτα.Φέρτε απαλά το έμβολο προς τα επάνω για να την ακινητοποιήσετε και να τη μαρκάρετε.

A plastic entrance feeder of great sturdiness. Resistant to the sun and harsh weather. Easy to use and apply in the hive without having to open the hive cover. Manufactured by food-grade plastic. It is available in two sizes: 1kg and 1,8 kg.

Top feeder with two compartments for feeding both liquid and solid food at the same time.
Both compartments can be used for all types of food due to the holes and special plugs that come with the feeder. Thus, you can choose to feed your bees with pollen substitute together with sugar-water or bee candy at the same time. Or choose to fill both compartments with only sugar-water. The compartments can take 4 and 3 kg of sugar-water respectively.
Moreover, the feeder is divided inside and below in 6 independent parts so if you have more than one swarms in the same hive you could feed them all independently without them coming in contact. This is ideal for queen breeders and creation of new bee swarms during spring.
• Provides insulation of the inside of the hive in cold and hot weather.
• When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides and you don’t come in contact with them. Ideal for fast feeding.
• Fits into the hive cover and alters the hive height only by a few mms.
• Has vent holes to allow humidity to escape the hive.
• Requires absolutely no maintenance.
• Built from high quality food-grade polypropylene.

After locating the queen, these catchers will help you grasp it without injuring it. Open the catcher and place it in the area where the queen is located. When you close the clip the worker bees will go through the gaps but the queen will not.

Bonapi 500, created and developed by a beekeeper for beekeeping. Reliable, versatile and easy to drive, Bonapi 500 has been designed to transport and lift beehives or barrels of honey while being transportable on a Pick-up. Handy and very stable, it can be used in your honey house as well as in your apiary. Ideal for heavy loads, the new Bonapi 500 can handle drums up to 500 kg. The empty weight is practically unchanged at around 600 kg, the width remains at 1.20 m, but the length increases from 1.80 m to 2.15 m. Bonapi 500 is distinguished by its low center of gravity, its independent rear wheels which give it great stability and grip on any type of terrain.

The ultimate professional lift for hives. Suitable for any truck or trailer. The Easy Loader can be installed on any kind of truck or trailer. It is powered by a car battery. It takes up 25cm of space, with a height of 1.45m and weighs only 240kg. Due to its innovative horizontal working position, it operates on any kind of ground without additional effort. It can lift 125kg which means it can take two hives at the same time. It has a robust electric motor for long and continuous operation via simple “up” and “down” buttons located on the frame. The grasping hooks are adjusted to fit the height and width of a hive.

How does it work:

With the above tool you can configure your own ANEL plastic beehive as you wish. Some items are mandatory (base, one hive body brood-chamber and one hive cover) and the others are optional.

Each time you select an item the picture changes, so you see what you are selecting.

From top to bottom, select:

The type of base board and then its color.

Then choose from one to three normal hive bodies (brood chambers) as well as the colors of each. Only one brood chamber is required if you want a single hive.

Frames for the brood chambers are optional. Choose plastic frames (waxed or unwaxed) and their color, or a variety of wooden frames, as well as the quantity. If you want all your hive bodies to have frames, select 10 frames for each hive body.

Then in the same way you choose if you want medium hive bodies ¾ Farrar (honey supers) and their frames. Honey supers and their frames are all optional.

Then choose the type of hive cover you want (mandatory option).

If you want fasteners (optional) select as follows:

• Two long fasteners for each hive body you are ordering (regular or medium).
• For fasteners on the base board and hive cover simply check the box and two pieces will automatically be inserted. The bottom parts of the fasteners go on the base and the hooks go on the hive cover.
• Choose the fastener application service if you want us to screw the fasteners on the hive parts. The quantity you need to choose should be the same as the total number of fasteners you are ordering.

You can then choose, optionally, the type of feeder, type of pollen collector, queen excluders and propolis collection screens.

Each time you select or deselect an item, the final price you see below the list of options changes.

When you have finished the configuration of your beehive, you can select the final quantity of hives next to the "Add to cart" button if you want more than one hive with the same configuration. 

By pressing "Add to cart" your beehives are added to the shopping cart.

They certainly make transportation of hives easier. They give a good grip, reducing muscle effort and improving the body posture during hive transportation. Handles fall by themselves in vertical position to reduce the required volume during loading of hives. They are placed opposite to each other or diagonally.