Close
Search
Filters

ANEL Plastic Beehives & Plastic Frames

per page
Products

Plastic Frame End Bars PP ANEL Lng set of 2 pieces

SKU: AN51579
Frames that DO NOT WARP, “SAG”, or OPEN UP. The end bars can also be bought separately. Enable you to build your own frames. Simply attach the two end bars to the top and bottom slats (which can be built easily with simple woodworking tools). A revolutionary product. It can be used with just about any foundation and in conjunction with any type of frame. They are made from a very durable plastic. The plastic prevents pests and fungus to form and grow. No rot can destroy them and they are the heat resistant. During the life of the frames you will change the wooden parts many times, but our plastic frame ends will remain good as new. Available in two types: a) Cn.3530 made by ABS resin with better mechanical and thermal resistance and b) Cn. 3540 P/S made by P/S resin that makes them less expensive and with acceptable characteristics.
€0.48 excl tax
€0.60 incl tax

Beehive doors Plastic for Bottom Boards ANEL BLUE

SKU: AN51003B
Replacement doors for ANEL mobile bottom board. A set of two doors come with an ANEL bottom board, but can also be bought separately. Suitable for securing the entrance during transport, as well as for protecting the entrance. Prevent bugs larger than 8 mm from entering the hive. They even offer protection against small yellow wasps, as they provide a "fortified" position for defence. Equipped with special pin on the back, locking them in place so that they remain stable during transport. No further securing required. To open, slightly pull the handle and then push upwards. You can leave one door open and the other closed, limiting the entrance of the hive. Available in yellow and blue, thus limiting disorientation of bees.
€0.57 excl tax
€0.71 incl tax

Beehive doors Plastic for Bottom Boards ANEL YELLOW

SKU: AN51003Y
Replacement doors for ANEL mobile bottom board. A set of two doors come with an ANEL bottom board, but can also be bought separately. Suitable for securing the entrance during transport, as well as for protecting the entrance. Prevent bugs larger than 8 mm from entering the hive. They even offer protection against small yellow wasps, as they provide a "fortified" position for defence. Equipped with special pin on the back, locking them in place so that they remain stable during transport. No further securing required. To open, slightly pull the handle and then push upwards. You can leave one door open and the other closed, limiting the entrance of the hive. Available in yellow and blue, thus limiting disorientation of bees.
€0.57 excl tax
€0.71 incl tax

Foundation Plastic PP ANEL Unwaxed cell d5.4

SKU: AN51751UPP
*CAN BE CUT TO ANY SMALLER DIMENSION YOU WISH - CONTACT US! ANEL plastic honeycomb foundation, printed with absolute hexagons (5.45mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations.
ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC..
€0.85 excl tax
€1.05 incl tax

Frame with Plastic Frame End Bars PP ANEL unassembled

SKU: AN51579UST
Unassembled special beekeeping frame which bears plastic bars left and right in order to withstand time, rough use and high speeds in the honey extractor. WARNING: it is suitable only for the insertion of plastic honeycomb foundations. The wooden laths on the top and bottom have openings where the plastic foundation is inserted just by pushing it with the hand. So forget about applying wire on your frames! Buy the plastic foundations and the frames ready from ANEL or build them yourself if you have the proper tools.
€0.90 excl tax
€1.12 incl tax

Frame with Plastic Frame End Bars PP ANEL assembled Lng Hoffman

SKU: AN51579AST
A special beekeeping frame which bears plastic bars left and right in order to withstand time, rough use and high speeds in the honey extractor. WARNING: it is suitable only for the insertion of plastic honeycomb foundations. The wooden laths on the top and bottom have openings where the plastic foundation is inserted just by pushing it with the hand. So forget about applying wire on your frames! Buy the plastic foundations and the frames ready from ANEL or build them yourself if you have the proper tools.
€1.03 excl tax
€1.28 incl tax

Frame Foundation for Honey Supper H16mm (~6 1/4'' Lng Hoffman-Farrar) All Plastic ANEL PS Unwaxed Lng Hoffman Black

SKU: AN51662PS
A plastic frame with integrated plastic foundation with perfectly printed hexagons (5,5mm). No wiring or riveting necessary. Resistant to wax moths. It does not get unfastened or loose and does not “sag”. You can use higher speeds in the honey extractor without destroying the comb (especially useful for thick honey types such as fir). All ANEL plastic frames are available waxed or unwaxed. If you want to wax ANEL frames yourself you can either dip them in molten wax (temperature 60-70⁰C) or wax them using a roll dipped into molten wax. TIP: The ANEL frames can be disinfected in a solution of caustic potash 5% at 80⁰C.
€1.07 excl tax
€1.33 incl tax

Foundation Plastic PS ANEL Unwaxed cell d5.5 Dadant 278x405

SKU: AN51751UPS
*CAN BE CUT TO ANY SMALLER DIMENSION YOU WISH - CONTACT US! ANEL plastic honeycomb foundation, printed with absolute hexagons (5.45mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations.
ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC..
€1.20 excl tax
€1.49 incl tax

Frame Foundation for Deep Hive Body H23,1mm (~9 1/8'' Lng Hoffman) All Plastic ANEL PS Unwaxed

SKU: AN51661PS
A plastic frame with integrated plastic foundation with perfectly printed hexagons (5,5mm). No wiring or riveting necessary. Resistant to wax moths. It does not get unfastened or loose and does not “sag”. You can use higher speeds in the honey extractor without destroying the comb (especially useful for thick honey types such as fir). All ANEL plastic frames are available waxed or unwaxed. If you want to wax ANEL frames yourself you can either dip them in molten wax (temperature 60-70⁰C) or wax them using a roll dipped into molten wax. TIP: The ANEL frames can be disinfected in a solution of caustic potash 5% at 80⁰C.
€1.27 excl tax
€1.57 incl tax

Foundation Plastic PP ANEL 420*212mm Unwaxed Applied in Wooden Frame

SKU: AN51751ST
ANEL plastic honeycomb foundation, printed with absolute hexagons (5.45mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations. ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC.
€1.51 excl tax
€1.87 incl tax

Foundation Plastic PP ANEL 420*212mm cell d5.4 Waxed

SKU: AN51752PP-ST
ANEL plastic honeycomb foundation, printed with absolute hexagons (5.45mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations. ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC.
€1.59 excl tax
€1.97 incl tax
Categories

Filter by:

Clear All
Min: €0.00 Max: €103.00
0 103