Beehives & Their Parts

The professional roof feeder. The ultimate tool for bee feeding. • Provides insulation of the inside of the hive in cold and hot weather. • When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides. • Whatever the inclination of your hive might be the bees can consume all the syrup. • Suitable for liquid (syrup) and solid (bee candy) feed. You will never again have the leaks experienced with wooden feeders. • Fits into the lid and does not alter the hive height. • Has vent holes to allow humidity to escape the hive. • Requires absolutely no maintenance. Built from very durable material.

A simple and easy to use division feeder. Inside there are special indentations for the bees to easily climb up but it is recommended to use some kind of floating material (wood etc) for avoiding the drowning of bees. In order to refill it you have to empty it of bees. The solid internal structure averts deformation when filling the feeder.

Εάν χάλασε το εξάρτημα από τους γυρεοσυλλέκτες σας ή εάν θέλετε να κατασκευάσετε τους δικούς σας γυρεοσυλλέκτες

Τα διαφράγματα βασίλισσας της ANEL είναι ελαφρύτερα από τα μεταλλικά διαφράγματα κάτι που τα καθιστά πολύ πιο εύκολα στη μεταφορά, τοποθέτηση και συλλογή στο μελισσοκομείο. • Με ακρίβεια τελειότητας στα διάκενα που είναι και το ουσιαστικότερο χαρακτηριστικό για τέτοιο προϊόν. • Με την κατάλληλη προστασία (αποφυγή έκθεσης στον ήλιο) έχουν απεριόριστη διάρκεια ζωής. • Δεν αλλάζουν τα διάκενα με τις μεταβολές της θερμοκρασίας. • Τα νεύρα είναι απόλυτα λεία χωρίς γωνίες και ΔΕΝ τραυματίζουν τις μέλισσες. • Έχουν πολύ καλύτερη μηχανική αντοχή σε σχέση με τα μεταλλικά (δεν χαλάνε από πτώση ή ρήψη). • Δεν οξειδώνονται από τη χρήση γαλακτικού ή μυρμηγκικού οξέως. • Καρφώνονται με ένα απλό καρφωτικό σε ξύλινο πλαίσιο (διατίθενται και έτοιμα σε ξύλινο πλαίσιο) • Καθαρίζονται από την πρόπολη πολύ εύκολα με ζεστό νερό ή ποτάσα • Τοποθετούνται και σε ξύλινη και σε πλαστική κυψέλη. Κατασκευασμένα από πλαστικό κατάλληλο για τρόφιμα. • Διατίθενται και με ενσωματωμένο πλαίσιο αποσυμφόρησης μαζί με δύο βασιλικά διαφράγματα ώστε να συνδυάσετε δύο βασίλισσες στην ίδια κυψέλη.

To install the disk, you must open a 30-40mm hole on the beehive side. The disk is installed on the hive by passing a screw through the disc center. It features 4 positions/“settings”: (i) completely closed, (ii) completely open, (iii) bee queen excluder and (iv) protection from hornets. TIP: Can be used for multiplication and merging of colonies. Making a 4 cm hole and installing two discs on a wooden sheet with same dimensions as the beehive, allows you, by changing disc “settings” to use the structure for queen separation (exclusion) and merging of colonies: first leave the discs at “completely closed” position with ventilation for 1-2 days, allowing the transfer of smell between the two colonies; then turn both discs to “queen excluder” position, thus allowing communication of the bees, while the queens keep giving birth without being able to contact/harm each other (since the discs/excluders are placed in between the two different floors created by the installation of the wood/disc structure).

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 2 ventilation plugs • With feeding plug on top • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

INTRODUCTORY PRICE FOR LIMITED TIME! Magnetic Numbers: Numbering your hives EASY, FAST & FLEXIBLE – Integrated powerful magnetic element

A plastic frame with integrated plastic foundation with perfectly printed hexagons (5,6 mm). No wiring or riveting necessary. Resistant to wax moths. It does not get unfastened or loose and does not “sag”. You can use higher speeds in the honey extractor without destroying the comb (especially useful for thick honey types such as fir). All ANEL plastic frames are available waxed or unwaxed. If you want to wax ANEL frames yourself you can either dip them in molten wax (temperature 60-70⁰C) or wax them using a roll dipped into molten wax. TIP: The ANEL frames can be disinfected in a solution of caustic potash 5% at 80⁰C.

A New ANEL Product! The NEW Doors Easy Click for ANEL Bottom Boards open and close with the use of the levers on both sides with a simple CLICK while they also have special safety bolts to stay in the position you choose. They can be easily removed and repositioned, giving you the option of a large entrance to the beehive. They can be easily placed on the bottom boards and come with special edges that help them remain firmly on your bottom boards. They provide security for beehive transportation. For even greater stability and safety they can be screwed to the hive body. They are ideal for both mobile and stationary apiaries. They do not corrode or get damaged by the sun or any weather conditions. Made from high quality 100% new and virgin food grade plastic.

Can be fastened with screws on the hive cover under the feeding cap or simply placed on the frames. Simple to use. You will need to add a floater (ref.AN30029) or alternative floating materials such as wood, net etc.

Easy and fast feeding of syrup to the bees. Forget spilled syrups and carrying buckets. The 12 volt high voltage syrup/water pump is equipped with an automatic pressure switch that opens and closes automatically when you open and close the hose nozzle.

Technical characteristics:
• Ability to pump 18.5 lt / pm
• Maximum flow rate: 7.8 (4.5GPM)
• Maximum pressure: 40PSI
• Motor voltage: 12V DC
• Automatic suction
• Pressure switch protection: With fully automatic ON/OFF control