Close
Search
Filters

Branding Iron "Fire Marker" LPG ANEL 14 Digits (not included)

SKU: AN1050LPG-RD14-ST
Be the first to review this product
Dimensions (Package): 41.00 x 29.00 x 9.50 cm
Dimensions (Item): 39.00 x 22.50 x 04.00 cm
Weight: 1.95 Kg
Items / Package: 1
€138.15 excl tax
€171.31 incl tax

Perhaps the best branding iron available worldwide. A product designed and manufactured for safe, efficient and ergonomic use. The heated area works like an oven directing the flame on the digits. At the same time, it prevents heat radiation from returning to the operator's hands. 

  • The digits are easily placed and can be changed separately
  • Heats very fast
  • Marks surfaces deeply 
  • It immediately replenishes the temperature lost during combustion of wood
  • It is very fast and does not require reheating pauses

Minimum digits needed: 10 

Technical Characteristics

Dimensions: 14 digits model: 39x23x4cm – 12 digits model: 39x20x4cm
Weight: 1.4 - 1.1 kg (without digits)
Type of LPG required: LPG PROPANE
LPG requirements: 14 digits model: 600g/H - 12 digits model: 400g/Η
LPG pressure requirements: 3Bar
Recommended type of pressure regulator: (ref:PH10503B) inlet (Pd+1) 16Bar - outlet Pd= 3Bar / 18Kg/Η
ATTENTION!!! The product operates ONLY with the appropriate pressure regulator and the required type of LPG. Using LPG or/and a pressure regulator out of specifications will cause out of limits temperatures in the digits (lower or higher), resulting in their permanent damage and eventually setting the device and the digits OUT OF WARRANTY.

Perhaps the best branding iron available worldwide. A product designed and manufactured for safe, efficient and ergonomic use. The heated area works like an oven directing the flame on the digits. At the same time, it prevents heat radiation from returning to the operator's hands. 

  • The digits are easily placed and can be changed separately
  • Heats very fast
  • Marks surfaces deeply 
  • It immediately replenishes the temperature lost during combustion of wood
  • It is very fast and does not require reheating pauses

Minimum digits needed: 10 

Technical Characteristics

Dimensions: 14 digits model: 39x23x4cm – 12 digits model: 39x20x4cm
Weight: 1.4 - 1.1 kg (without digits)
Type of LPG required: LPG PROPANE
LPG requirements: 14 digits model: 600g/H - 12 digits model: 400g/Η
LPG pressure requirements: 3Bar
Recommended type of pressure regulator: (ref:PH10503B) inlet (Pd+1) 16Bar - outlet Pd= 3Bar / 18Kg/Η
ATTENTION!!! The product operates ONLY with the appropriate pressure regulator and the required type of LPG. Using LPG or/and a pressure regulator out of specifications will cause out of limits temperatures in the digits (lower or higher), resulting in their permanent damage and eventually setting the device and the digits OUT OF WARRANTY.

Rate this product
  • Only registered users can write reviews
Rating
  • Bad
  • Excellent
Customers who bought this item also bought

Digit for Fire Marker ANEL with Screws

SKU: AN10507
Made from solid brass, employing modern technology, deeply engraved to make deep marks on surfaces.
€8.53 excl tax
€10.58 incl tax

Foundation Plastic PS ANEL 405*278mm (or Cut Smaller) Dadant cell d5.6 Unwaxed

SKU: AN51751UPS
*CAN BE CUT TO ANY SMALLER DIMENSION YOU WISH - CONTACT US! ANEL plastic honeycomb foundation, printed with absolute hexagons (5.6 mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations.
ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC..
€1.39 excl tax
€1.72 incl tax

Queen Excluder Injected Plastic PP ANEL

SKU: AN51401A

Much lighter than metal excluders which makes them easier to carry, install and collect at the apiary. Perfect gaps that do not injure the bees. Just 3 mm thick so that the hive body connectors can be fastened. Resistant to oxalic or formic acid, or even steam (up to 119 °C).

Specifications

• Available Dimensions:

420x506 mm (10 Frames Langstroth & Dadant)

450x506 mm

460x460 mm

430x430 mm

420x420 mm

342x310 mm

342x343 mm

367x506 mm

* Smaller custom dimensions can also be made.

  • Thickness: 3 mm
  • Gap dimensions: 4.2 x 19.5 mm
  • Weight: 260.00 g
  • Items / Package: 50
  • Package Dimensions: 52 x 44 x 14 cm
  • Package Weight: 13 kg
  • Items / Pallet: 2000
  • Material: Polypropylene Food-grade
€1.53 excl tax
€1.90 incl tax