Heel for ANEL LockFit Plastic Beehive Bottom Board

Amazing strength, fit for tough use. With five points for hive body stabilization. With bases of special non-slip material, screwed to the bottom, so that the hives do not slip during transportation by truck and the bases remain attached. Accompanied by very practical transportation-protection doors.

Can be connected with the hive body with four different ways:
1. With adjustable front and rear fasteners.
2. With wire fasteners right and left.
3. Screw-in. With special connectors so that the bottom can be screwed permanently on the hive body thus transforming into a brood chamber with non-atachable bottom board.
4. With attachment straps which can be removed after beehive placement to discourage thieves.

A beehive bodie that has only advantages! Filled with polyurethane foam insulation. It is very lightweight. Does not deform, Does not crack/open up and does not rot. It has integrated ergonomically designed lifting handles on the front and on the back, designed for comfortable carrying. Warm in winter and cool in summer. Suitable for all wooden Langstroth hives. • Non-slip upper and lower surfaces • It can be drilled, screwed or hammered at will. It can endure anything! • Available in white, gray, blue, yellow and green • Robust and very durable • It can be sealed with the fire marker and the seal cannot be tampered with by thieves • All materials in contact with bees are food grade • To connect the parts you can use wire fasteners right and left or adjustable fasteners front and back or even attachment straps

A beehive bodie that has only advantages! Filled with polyurethane foam insulation. It is very lightweight. Does not deform, Does not crack/open up and does not rot. It has integrated ergonomically designed lifting handles on the front and on the back, designed for comfortable carrying. Warm in winter and cool in summer. Suitable for all wooden Langstroth hives.

• Non-slip upper and lower surfaces
• It can be drilled, screwed or hammered at will. It can endure anything!
• Available in white, gray, blue, yellow and green
• Robust and very durable
• It can be sealed with the fire marker and the seal cannot be tampered with by thieves
• All materials in contact with bees are food grade
• To connect the parts you can use wire fasteners right and left or adjustable fasteners front and back or even attachment straps

Foundation Plastic PS ANEL 420*212mm Langstroth (or Cut Smaller) cell d5.6 Unwaxed

A New ANEL Product! The NEW Doors Easy Click for ANEL Bottom Boards open and close with the use of the levers on both sides with a simple CLICK while they also have special safety bolts to stay in the position you choose. They can be easily removed and repositioned, giving you the option of a large entrance to the beehive. They can be easily placed on the bottom boards and come with special edges that help them remain firmly on your bottom boards. They provide security for beehive transportation. For even greater stability and safety they can be screwed to the hive body. They are ideal for both mobile and stationary apiaries. They do not corrode or get damaged by the sun or any weather conditions. Made from high quality 100% new and virgin food grade plastic.

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 4 ventilation plugs • With feeding plug on top • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

A New ANEL Product! The NEW Doors Easy Click for ANEL Bottom Boards open and close with the use of the levers on both sides with a simple CLICK while they also have special safety bolts to stay in the position you choose. They can be easily removed and repositioned, giving you the option of a large entrance to the beehive. They can be easily placed on the bottom boards and come with special edges that help them remain firmly on your bottom boards. They provide security for beehive transportation. For even greater stability and safety they can be screwed to the hive body. They are ideal for both mobile and stationary apiaries. They do not corrode or get damaged by the sun or any weather conditions. Made from high quality 100% new and virgin food grade plastic.

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 4 ventilation plugs • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

This is a larger version of the classic ANEL pollen collector. Thus, you get ALL the advantages multiplied! More than two times larger pollen collection area. Larger flight board on the tray. Larger rain cover. Better drawer attachment so that it is not affected by wind or bugs. With specially designed gaps that do not injure the bees while retaining 60% of the pollen so that there is no danger of pollen deprivation for the hive. PLUS ... it features an incredibly simple way of attachment to the ANEL-PCCLIP hive. It has two points of protrusion, right and left, that are pushed in the hive entrance; the collector is supported on these two points. The classic ANEL collector has become famous all over the world. We are confident that you will love the new ANEL BIG GUY collector the way you loved the old one. Please be on alert for counterfeits! The great success and effectiveness of ANEL products drive competitors to produce nearly identical copies to fool you! But the difference from counterfeits is in the manufacturing details. Counterfeits are only externally similar, while being of questionable quality and efficiency (if not dangerous). Genuine ANEL collectors, as well as all other company products, carry the ANEL brand.

ANEL plastic honeycomb foundation, printed with absolute hexagons (5.6 mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations. ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC.

*CAN BE CUT TO ANY SMALLER DIMENSION YOU WISH - CONTACT US! ANEL plastic honeycomb foundation, printed with absolute hexagons (5.6 mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations.
ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC..