Beehives & Their Parts

Προστίθενται στα Χρώματα Κυψέλης Οικολογικά TA11BO.. και προσδίδουν το χρώμα και την απόχρωση που εσείς θέλετε.

Προστίθενται στα Χρώματα Κυψέλης Οικολογικά TA11BO.. και προσδίδουν το χρώμα και την απόχρωση που εσείς θέλετε.

Προστίθενται στα Χρώματα Κυψέλης Οικολογικά TA11BO.. και προσδίδουν το χρώμα και την απόχρωση που εσείς θέλετε.

What are the advantages of a ventilated plastic bottom board?
• Bees can keep the hive clean very easily.
• When applying treatments for varroa the parasites fall down under the hive thus treating the hive more effectively.
• Ventilation means less humidity and less humidity means fewer chances that nozema will spread in the hive. 

Amazing strength, fit for tough use. With five points for hive body stabilization. With bases of special non-slip material, screwed to the bottom, so that the hives do not slip during transportation by truck and the bases remain attached. Accompanied by very practical transportation-protection doors.

Can be connected with the hive body with four different ways:
1. With adjustable front and rear fasteners.
2. With wire fasteners right and left.
3. Screw-in. With special connectors so that the bottom can be screwed permanently on the hive body thus transforming into a brood chamber with non-atachable bottom board.
4. With attachment straps which can be removed after beehive placement to discourage thieves.

Amazing strength, fit for tough use. With five points for hive body stabilization. With bases of special non-slip material, screwed to the bottom, so that the hives do not slip during transportation by truck and the bases remain attached. Accompanied by very practical transportation-protection doors.

Can be connected with the hive body with four different ways:
1. With adjustable front and rear fasteners.
2. With wire fasteners right and left.
3. Screw-in. With special connectors so that the bottom can be screwed permanently on the hive body thus transforming into a brood chamber with non-atachable bottom board.
4. With attachment straps which can be removed after beehive placement to discourage thieves.

This is a larger version of the classic ANEL pollen collector. Thus, you get ALL the advantages multiplied! More than two times larger pollen collection area. Larger flight board on the tray. Larger rain cover. Better drawer attachment so that it is not affected by wind or bugs. With specially designed gaps that do not injure the bees while retaining 60% of the pollen so that there is no danger of pollen deprivation for the hive. PLUS ... it features an incredibly simple way of attachment to the ANEL-PCCLIP hive. It has two points of protrusion, right and left, that are pushed in the hive entrance; the collector is supported on these two points. The classic ANEL collector has become famous all over the world. We are confident that you will love the new ANEL BIG GUY collector the way you loved the old one. Please be on alert for counterfeits! The great success and effectiveness of ANEL products drive competitors to produce nearly identical copies to fool you! But the difference from counterfeits is in the manufacturing details. Counterfeits are only externally similar, while being of questionable quality and efficiency (if not dangerous). Genuine ANEL collectors, as well as all other company products, carry the ANEL brand.

Queen Excluder Injected with Two Entrances Plastic PP ANEL

Item Description: Queen Excluder with Two Entrances protected from wasps, Perimetric frame, Partitions for combination with vertical dividers for multiple colonies or other uses.

Properties - Uses:

It is used like all queen excluders interposed between the brood-chamber and the honey-chambers.

The doors open and close at will and you can have them applied to the hives during transport.

The perimetric frame makes it possible to use it as a double queen excluder by placing a single excluder on top of it.

Internal partitions offer a guide to be combined with vertical dividers to confine the queen even within a frame in order to:

· Treat (e.g. for Varroa) in a controlled brood environment.

· Limit the brood before flowering.

· Multiply colonies.

· Combine it with a common excluder in the upper part to turn into a double excluder. So, you have one queen up and one on the bottom.

· Combine it with a common excluder for multiplication: In this case you do the same thing as the vertical divider, but you put the entrances of the excluder facing the opposite side from the doors of the brood-chamber.

Much lighter than metal excluders which makes them easier to carry, install and collect at the apiary. Perfect gaps that do not injure the bees. Just 3 mm thick so that the hive body connectors can be fastened. Resistant to oxalic or formic acid, or even steam (up to 119 °C).

Specifications

• Available Dimensions:

420x506 mm (10 Frames Langstroth & Dadant)

450x506 mm

460x460 mm

430x430 mm

420x420 mm

342x310 mm

342x343 mm

367x506 mm

* Smaller custom dimensions can also be made.

• Thickness: 3 mm
• Gap dimensions: 4.2 x 19.5 mm
• Weight: 260.00 g
• Items / Package: 50
• Package Dimensions: 52 x 44 x 14 cm
• Package Weight: 13 kg
• Items / Pallet: 2000
• Material: Polypropylene Food-grade

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 4 ventilation plugs • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

ANEL plastic honeycomb foundation, printed with absolute hexagons (5.6 mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations. ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC.

Πλαστική κυψέλη ANEL με πανίσχυρη μόνωση πολυουρεθάνης (PU) υψηλής πυκνότητας. Κατασκευή από υψηλής ποιότητας αντιμικροβιακά υλικά της ANEL που προσδίδουν ασύγκριτη αντοχή στον ήλιο και στις καιρικές συνθήκες . Έχουν άριστες αντοχές και κάνουν τις μέλισσες να αισθάνονται πιο άνετα (υλικό αντί-στρες). Με άριστη μόνωση και πολύ καλή διαφοροποίηση εσωτερικής με εξωτερική θερμοκρασία, τόσο το χειμώνα όσο και το καλοκαίρι.
Όροφος με αντιολισθητική επιφάνεια στην πάνω και την κάτω πλευρά του για μέγιστη σταθεροποίηση. Με τα κλασσικά χωνευτά χερούλια αλλά και ένα δεύτερο ζευγάρι εξωτερικά χερούλια ειδικά σχεδιασμένα για εύκολη μεταφορά της κυψέλης χωρίς να επηρεάζουν και να ενοχλούν την τοποθέτηση κυψελών δίπλα δίπλα.
Με αεριζόμενο κινητό πλαστικό πάτο που διατηρεί όλα τα πλεονεκτήματα του κλειστού πάτου ANEL αλλά υιοθετεί τη νέα τάση που έχει προκύψει παγκόσμια για αερισμό της κυψέλης από το κάτω μέρος. Τι προσφέρει ο αεριζόμενος/αντιβαρρόα πάτος: Έχει παρατηρηθεί ότι οι μέλισσες πετούν πολλά βαρρόα καθημερινά κάτω τα οποία όμως ξανανεβαίνουν στις μέλισσες. Με τον ανοιχτό πάτο της ANEL όμως όποιο βαρρόα πέσει κάτω στο χώμα εξουδετερώνεται, πεθαίνει και το μελίσσι έχει σημαντικό όφελος. Όπως επίσης σημαντικό όφελος έχει και για ασθένειες που σχετίζονται με την υγρασία (ασκοσφαίρωση και νοζεμίαση) οι οποίες αποδεδειγμένα όταν η κυψέλη αερίζεται επαρκώς προσβάλουν μικρότερο αριθμό μελισσοσμηνών. Κατασκευασμένος έτσι ώστε να μη βουλώνει από τη δραστηριότητα του σμήνους.
Σύνδεση με τον όροφο με τέσσερις διαφορετικούς τρόπους:
• Με ρυθμιζόμενους συνδετήρες εμπρός και πίσω
• Με συνδετήρες σύρματος δεξιά και αριστερά
• Βιδωτοί: Υπάρχουν ειδικές υποδοχές για να βιδώσουν μόνιμα τον πάτο στο πάτωμα
• Με ιμάντες σύνδεσης τους οποίους και μπορείτε να αφαιρέσετε μετά την τοποθέτηση των κυψελών για να αποθαρρύνετε τους κλέφτες.
Ο πάτος της πλαστικής κυψέλης μετατρέπεται πολύ εύκολα σε γυρεοσυλλέκτη: Διαθέτει ενσωματωμένο πλέγμα συλλογής γύρης. Έτσι με την προμήθεια του σετ συλλογής γύρης ref. AN57100 μπορείτε να μετατρέψετε τον υβριδικό σας πάτο ANEL σε γυρεοσυλλέκτη οποιαδήποτε στιγμή το επιθυμείτε!
Συνοδεύεται από πολύ πρακτικές πόρτες: Τα πορτάκια για το κλείσιμο της εισόδου της κυψέλης που συνοδεύουν τον πάτο είναι εφοδιασμένα με ειδικές θυρίδες εισόδου για τις μέλισσες οι οποίες εμποδίζουν την είσοδο σε ζωύφια μεγαλύτερα των 8mm. Προστατεύουν ακόμα και από τις μικρές κίτρινες σφήκες γιατί δίνουν την ευκαιρία στις εργάτριες να αμυνθούν από «οχυρωμένη» θέση τους εχθρούς. Τα πορτάκια είναι εφοδιασμένα στην πίσω πλευρά με ένα πιράκι το οποίο ασφαλίζει αυτόματα την πόρτα στη θέση μεταφοράς.
Δεν γλιστράει στην καρότσα κατά τη μεταφορά: Τα πέλματα του πάτου είναι από ειδικό αντιολισθητικό υλικό και είναι βιδωμένα στον πάτο. Έτσι και δεν γλιστράνε οι κυψέλες στην καρότσα του φορτηγού κατά τη μεταφορά και δεν αποκολλούνται τα πέλματα από τα πόδια.
• Μεγάλη διάρκεια ζωής που ξεπερνάει τα 10 χρόνια.
• Δεν χρειάζεται καμία συντήρηση.
• Ασύγκριτες αντοχές σε κρούση και στήριξη φορτίου (>500 Kg).
• Εντυπωσιακά στιβαρή και ταυτόχρονα ελαφριά.
• Δεν πετσικάρει, δεν σαπίζει και δεν κρατάει νερά.
• Το υλικό που έρχεται σε επαφή με τη μέλισσα είναι κατάλληλο για τρόφιμα.
• Δεν διαβρώνεται από χημικά (καυστική ποτάσα, οξαλικό οξύ, μυρμηκικό οξύ, χλωρίνη κ.α.).
• Με 4 σημεία εφαρμογής συνδετήρα εμπρός, πίσω και στα πλάγια (ρυθμιζόμενου ή τύπου σύρματος).
• Πυροσφραγίζεται πολύ εύκολα και η σφραγίδα ΔΕΝ μπορεί να παραποιηθεί.
Τρυπήστε σε όσα σημεία θέλετε και εφαρμόστε τάπες εισόδου ή αερισμού στις πλευρές της.
• Διαθέσιμοι όροφοι σε πέντε χρώματα : μπλε, πράσινο, κίτρινο, γκρι και λευκό.
• Διαθέσιμοι πάτοι σε δύο χρώματα : λευκό και καφέ.
• Διαθέσιμα καπάκια σε δύο χρώματα : λευκό και γκρι.

The professional roof feeder. The ultimate tool for bee feeding. • Provides insulation of the inside of the hive in cold and hot weather. • When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides. • Whatever the inclination of your hive might be the bees can consume all the syrup. • Suitable for liquid (syrup) and solid (bee candy) feed. You will never again have the leaks experienced with wooden feeders. • Fits into the lid and does not alter the hive height. • Has vent holes to allow humidity to escape the hive. • Requires absolutely no maintenance. Built from very durable material.

In the 1970s, Mr. Emmanuel Pantelakis, founder of ANEL, designed and built this revolutionary type feeder. This invention has received a Silver Award from APIMONDIA. The only feeder that fills from bottom to top. There is no need to empty it of bees before filling it. • Special plastic floaters, right and left, protect the bees from drowning. • The inner walls have indentations to allow the bees to easily climb up. • Ideal for feeding in hives where queen rearing is applied. TIP: In winter you can use it to narrow the space available to the bees and insulate the colony from the side.

Yet another reason to purchase ANEL detachable bottom boards! With this set you can convert ANEL bottom boards into pollen collectors any time you wish. Its gaps for pollen entrapment have the same shape with those of the classic ANEL collector, not injuring the bees. Pollen is collected in the special trays included in the set. The trays snap and unsnap easily from the front, without the need to move the hive.

Combines well with the entrance cap (ref.AN51670) or the side entrance tray (ref.AN51676) so that each section has its own entrance, turning any hive into two 5-frame or three 3-frame hives. To block the passage of the queen over the vertical barrier, you can use queen excluders (ref.AN51401-4). If you want to block the communication of worker bees as well (in case of three-hive units) you can use the propolis collection screen (ref.AN58001). • TIP: Open a 4cm hole in the places where you want the entrances of the individual colony, apply the entrance plug and you are ready. Your hive has now been equipped with extra entrances which may be useful in the future, even as ventilation ports during hot months.

An innovative new ANEL Product! This is the New Hybrid ANEL Entrance, Ventilation & Feeding Plug.
Multiple uses:
• Ventilation screen and/or feeding plug.
• If you rotate the mechanism, with a simple CLICK, it turns into a small safety entrance for bees.
• Remove the mechanism altogether and you can use it as big entrance or a feeding plug.
To apply it in your beehive you will need:
• A drill with a 43mm hole saw
• Four 3,5 x 13mm screws
• A Polyurethane Sealant
We apply the PU sealant in the inner surface of the plug. We follow the same steps for a wooden beehive. The new ANEL plug is of larger diameter than the previous model. To replace the older model with the new plug you will need a 43mm cylindrical drill. The new plug comes with a hinge and opens sideways. It is advised to open it with a hive tool while holding it from the top, or by hand using our thumbnails. Due to opening sideways the plug cannot be closed by the wind. Position the lid in 90 degrees from the body to remove it. This is very useful because a potential thief will need special equipment.
The new ANEL Entrance, Ventilation & Feeding Plug can be used in many ways. As a feeding plug on the top cover, as ventilation or entrance in the frontside / backside of the top cover, as a small entrance on the side of the beehive protecting the bees from potential enemies, as ventilation on the sides, or as a big hive entrance. An alternative beehive entrance is very important. In case of plunder we leave the small entrance open so that only few bees can come in and the intruders can be handled. We close the front doors and lead the bees on the alternative entrance which the already know and use. For even more drastic measures if we want to prevent plunder, we just seal the plugs on the top cover.
Some other examples of how to use the New ANEL Entrance, Ventilation & Feeding Plug. During spring if we want to use a second hive body, it is very useful to have a second entrance in the upper hive body for beehive decongestion. A second entrance also helps bees collect honey easier, especially if we use a queen excluder.
Also, during spring if we have a ten-frame beehive that is in the process of swarming, we can divide it and have two independent swarms. Half of the frames can be transferred to a new hive body. We use a fabric cover to prevent pheromones from mixing and a queen excluder to keep the two queens away from each other. We place the new hive body on top. The original swarm uses the front entrance, while the new one uses the entrance on the back.
If we want to have 2 swarms in a single beehive, we can provide them two independent entrances from both sides. We keep them divided in two with the help of the ANEL vertical beehive divider. We can also have 3 swarms in the same beehive with the use of 2 dividers. This swarm uses the entrance on the right, this one uses the entrance on the left and the middle swarm uses the entrance on the back. In that case we will need a top feeder to keep them separated and feed them independently with syrup or candy.

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 4 ventilation plugs • With feeding plug on top • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

Καπάκι Κυψέλης Ξύλινο Lng.