Hive Upgrading

They certainly make transportation of hives easier. They give a good grip, reducing muscle effort and improving the body posture during hive transportation. Handles fall by themselves in vertical position to reduce the required volume during loading of hives. They are placed opposite to each other or diagonally.

Equip your hives with new ventilation and feeding caps. A simple idea that minimizes feeding time and keeps the interior of the hive cool and dry. Their screen does not allow the bees to pass through. Designed for ANEL caps and hives but you can screw them in any type of hive after opening a 4cm diameter hole. In very cold weather you can shut them with their special lids. Built from very durable material.

Secure shutting for transportation. The perimeter of the cups can be sealed with various products, like Hermaflex, sticky silicones etc. • TIP: In hot weather is can be used as air vent.

An innovative new ANEL Product! This is the New Hybrid ANEL Entrance, Ventilation & Feeding Plug.
Multiple uses:
• Ventilation screen and/or feeding plug.
• If you rotate the mechanism, with a simple CLICK, it turns into a small safety entrance for bees.
• Remove the mechanism altogether and you can use it as big entrance or a feeding plug.
To apply it in your beehive you will need:
• A drill with a 43mm hole saw
• Four 3,5 x 13mm screws
• A Polyurethane Sealant
We apply the PU sealant in the inner surface of the plug. We follow the same steps for a wooden beehive. The new ANEL plug is of larger diameter than the previous model. To replace the older model with the new plug you will need a 43mm cylindrical drill. The new plug comes with a hinge and opens sideways. It is advised to open it with a hive tool while holding it from the top, or by hand using our thumbnails. Due to opening sideways the plug cannot be closed by the wind. Position the lid in 90 degrees from the body to remove it. This is very useful because a potential thief will need special equipment.
The new ANEL Entrance, Ventilation & Feeding Plug can be used in many ways. As a feeding plug on the top cover, as ventilation or entrance in the frontside / backside of the top cover, as a small entrance on the side of the beehive protecting the bees from potential enemies, as ventilation on the sides, or as a big hive entrance. An alternative beehive entrance is very important. In case of plunder we leave the small entrance open so that only few bees can come in and the intruders can be handled. We close the front doors and lead the bees on the alternative entrance which the already know and use. For even more drastic measures if we want to prevent plunder, we just seal the plugs on the top cover.
Some other examples of how to use the New ANEL Entrance, Ventilation & Feeding Plug. During spring if we want to use a second hive body, it is very useful to have a second entrance in the upper hive body for beehive decongestion. A second entrance also helps bees collect honey easier, especially if we use a queen excluder.
Also, during spring if we have a ten-frame beehive that is in the process of swarming, we can divide it and have two independent swarms. Half of the frames can be transferred to a new hive body. We use a fabric cover to prevent pheromones from mixing and a queen excluder to keep the two queens away from each other. We place the new hive body on top. The original swarm uses the front entrance, while the new one uses the entrance on the back.
If we want to have 2 swarms in a single beehive, we can provide them two independent entrances from both sides. We keep them divided in two with the help of the ANEL vertical beehive divider. We can also have 3 swarms in the same beehive with the use of 2 dividers. This swarm uses the entrance on the right, this one uses the entrance on the left and the middle swarm uses the entrance on the back. In that case we will need a top feeder to keep them separated and feed them independently with syrup or candy.

INTRODUCTORY PRICE FOR LIMITED TIME! Orientators for bees: Help your bees find their home on their way back and not get confused by same color hives!
– Easy to be applied
– Reusable
– Electrostatic colored
– Combine them with Magnetic Numbers: Numbering your hives EASY, FAST & FLEXIBLE

INTRODUCTORY PRICE FOR LIMITED TIME! Orientators for bees: Help your bees find their home on their way back and not get confused by same color hives!
– Easy to be applied
– Reusable
– Electrostatic colored
– Combine them with Magnetic Numbers: Numbering your hives EASY, FAST & FLEXIBLE

The most recognized hive accessory in Greece. The most recognized hive accessory in Greece. Mounted on the cover and allows you to fill the roof feeder without disturbing the bees. Opens easily and closes securely. A very useful hive accessory with a permanent mounting which will always be useful. Mounted on the side of the box as extra entrance when using hive dividers or when you use multiple queen or colonies methods. It can be perfectly combined with the ANEL Hybrid Bottom Board Lng ref. AN51100 to transform ordinary brood chambers into 3-hive units with independent entrances. In hot weather it can be used as air vent.

INTRODUCTORY PRICE FOR LIMITED TIME! Magnetic Numbers: Numbering your hives EASY, FAST & FLEXIBLE – Integrated powerful magnetic element

The contact of wood with the ground means high humidity and an environment where microorganisms and insects can develop, decomposing the wood and ruining your hive. If you have hives with wooden bases or brood chambers, sooner or later you will run into the problem of rotting wood. ANEL plastic legs for wooden hives are inserted between the ground and the hive wooden bottom, reducing humidity. Mounted easily and securely with screws.

They simultaneously solve two problems: - Elevate the hive from the ground level, facilitating the beekeeper’s work. - Provide protection from crawling bugs, as they cannot enter the hive. You can also add repellant fluid (like petrol) or adhesive (like oil or grease) in the special tray. Any creature trying to cross Vrahipus will be trapped in place. The Hive Legs Vrahipus are designed to snap together; thus, you can add as many as necessary, to adjust the desired height. PROTECT YOUR HIVES FROM AETHINA TUMIDA ! The legs can be perfectly combined with bee pollen collection set ref. AN57100 or other entrance pollen collector, to protect your collected pollen from unwanted “visitors”. - TIP: To fasten the Hive Legs Vrahipus on an ANEL bottom board, you must first unscrew the bottom board bases (feet) and then snap Vrahipus in place. The bases snap very easily on the bottom of the Vrahipus feet. - TIP: To fasten them on wooden bottom boards or brood chambers, use screws that are 1cm longer compared to the wood. You will need 4 screws for each leg.

To install the disk, you must open a 30-40mm hole on the beehive side. The disk is installed on the hive by passing a screw through the disc center. It features 4 positions/“settings”: (i) completely closed, (ii) completely open, (iii) bee queen excluder and (iv) protection from hornets. TIP: Can be used for multiplication and merging of colonies. Making a 4 cm hole and installing two discs on a wooden sheet with same dimensions as the beehive, allows you, by changing disc “settings” to use the structure for queen separation (exclusion) and merging of colonies: first leave the discs at “completely closed” position with ventilation for 1-2 days, allowing the transfer of smell between the two colonies; then turn both discs to “queen excluder” position, thus allowing communication of the bees, while the queens keep giving birth without being able to contact/harm each other (since the discs/excluders are placed in between the two different floors created by the installation of the wood/disc structure).

INTRODUCTORY PRICE FOR LIMITED TIME! Magnetic Numbers: Numbering your hives EASY, FAST & FLEXIBLE – Integrated powerful magnetic element