Preparing Your Frames

Placed in the holes of the frame through which the wire passes so that the wood is not damaged. Due to stretching and the weight of the honeycomb the wire tends to penetrate into the wood; thus, the wire loosens and the honeycomb is destroyed.

The transformer changes the common 220V household current to 14V. Simply place the terminals at the ends of the wire, and the wire will heat up automatically. The wax will be attached on the wire and you simply have to apply it with your hand. • TIP: It would be helpful to place the frame horizontally, over a flat non-flammable plate smaller in size than the inside of the frame, so that it is in contact with the wire. Thus, the artificial sheet will not be damaged due to excessive heating (it could melt and tear), and you can apply enough pressure with your hand! The transformer is not waterproof. It should not be in contact with water.

Simple and effective! Without mechanisms that could create trouble. Can accommodate most of wire spools.

Another tool for installing rivets. Screw the device on a flat surface, place the rivet on the protruding piston, place the frame with the hole in the center of the piston, lower the lever and the rivet will get into the hole of the frame. Simple as that!

Placed in the holes of the frame through which the wire passes so that the wood is not damaged. Due to stretching and the weight of the honeycomb the wire tends to penetrate into the wood; thus, the wire loosens and the honeycomb is destroyed.

Placed in the holes of the frame through which the wire passes so that the wood is not damaged. Due to stretching and the weight of the honeycomb the wire tends to penetrate into the wood; thus, the wire loosens and the honeycomb is destroyed.

Placed in the holes of the frame through which the wire passes so that the wood is not damaged. Due to stretching and the weight of the honeycomb the wire tends to penetrate into the wood; thus, the wire loosens and the honeycomb is destroyed.

Συσκευή συρμάτωσης πλαισίων με ενσωματωμένο μετασχηματιστή για πέρασμα κηρηθρών στο πλαίσιο που μόλις συρματώσατε.

AMA frame wiring device Lightweight construction which facilitates wiring. After completion of the wiring, release of the frame will stretch the wire and you can apply the honeycomb.